Color

Peerless-AVs PRG Precision Gear Projector Mount is simplifying the way image alignment is done.

The patent-pending precision gear design allows exact tilt and roll image positioning by either simply turning two adjustment knobs with a Phillips screw driver, or use the tool-less option by extending the knobs to adjust by hand. Just set the precision gear to the desired position to secure it in place it will hold its position even during projector maintenance. With Peerless-AV PRG Precision Gear Projector Mount, just set it and forget it. No more adjustment screws. No more micro adjustments. No more hassles.

• Specifications: Tilt: ±20°, Roll: ±10°, Swivel: 360° when mounted on extension column ±15° when flush mounted on ceilings
• Pre-installed security screws provide optional tilt and roll lock to prevent tampering with adjustment knobs
• Spider® Universal Adapter Plate extends up to 17.63" (448 mm) to fit most projector models
• Quick-release mechanism to easily service projector
• ”U” shaped pitch bracket allows for hassle free cable routing |Cable management allows cables to be routed through projector mount out of sight |Horizontal wrench access slots make flush mounting installations fast and easy
• Pre-assembled design reduces installation time
• Two adjustment knobs control projector image alignment
• Patent-pending precision gears provides exact projector image alignment

Description

The National Time PS-3, PS-6, PS-12 Power Supplies are designed to compliment National Time's Master Clocks with low voltage digital and/or analog clocks. Each offers power limited transformer(s) with individual circuit breakers to allow less costly Class 2 wiring installations. Each transformer can supply 3.12A of 24VAC. For 2- wire clock systems, each transformer supports a clock circuit, while for 3-wire systems one transformer supplies 'run' power while another supplies the 'reset' power for a clock circuit. The power supplies may be converted to Remote Power Boosters with the addition of the optional PS-Relays. Each power supply is housed in a durable steel enclosure designed to match National Time's Master Clocks and create an integrated and attractive installation.

PS-3:

One 3.12A 120/24VAC Transformer will support one 2-wire clock circuit. Order one PS-Relay to create circuit booster supply. 9"x8"x4" Enclosure. Two knockouts each side.

PS-6:

Two 3.12A 120/24VAC Transformers will support either two 2-wire clock circuits, or one 3- wire clock circuit. Order one PS-Relay to create a dual circuit 2-wire booster, or two PS-Relays to create a 3- wire circuit booster supply. 9"x8"x4" Enclosure. Two knockouts each side.

PS-12:

Four 3.12A 120/24VAC Transformers will support either four 2-wire clock circuits, or two 3- wire circuits. Order one PS-Relay to create a quad circuit 2-wire booster, or two PS-Relays to create a dual 3-wire circuit booster supply. 12"x12"x4" Enclosure. Two knockouts top and bottom.

Features

• 120VAC/24VAC Power Supply
• UL Recognized Power-Limited Isolation Transformers
• Individual Circuit Breakers
• Durable Steel Enclosure
• Integrated System Look
• Flush and Surface Mount Versions
• Made in the U.S.A.

Vector Pro™ II provides a clean look with its cable management capabilities. The included extension column connector incorporates internal cable management paths that keep unsightly cords concealed from view. The mount also features a ceiling plate, ball and socket design, multidirectional positioning (roll, pitch and yaw) for proper image alignment and preinstalled security hardware at every connection point. This projector mount is perfect for use in classrooms, boardrooms, hotels, bars and restaurants or anywhere a projector needs to be mounted. The Vector Pro™ II can be flush mounted to the ceiling or mounted on the wall. It can also be mounted using 1-1/2" (38 mm) diameter extension column or 1/2" (38 mm) thread rod.

Description

Peerless-AV’s SmartMount® Universal Portrait Tilt Wall Mount delivers an ultra-slim profile designed to hold large displays up to 350lb. Installation and maintenance are made easy with the STP680’s robust feature set. Auto-latching adaptor rails automatically secure the display without the use of a tool. The mount’s built-in kickstand holds the display safely from the wall during cable routing, while the open wall plate allows for increased electrical and cable management options. Horizontal and vertical display adjustment allow for quick fine-tuning of the mounted display.

Features

• Universal mount fits displays with mounting patterns up to 494 x 650mm (19.45" W x 25.59" H)
• Low-profile design holds display only 1.70" (43mm) from the wall
• Easy hang wall plate allows a bolt to be pre-installed to ease wall plate installation
• Lateral display adjustment up to 3.38" (85.9mm)
• 1" of post-installation vertical adjustment provides flexibility in the installation
• Includes fastener pack with all necessary mounting and display attachment hardware (including M10)